WARNING:

• Careful.  The beverage you are about to enjoy is very hot.  For best results always use caution.
• Always press the AUTOSEAL® button when the tumbler is in the upright position prior to lifting it to drink.  This will release any built-up pressure.  Release button to seal mug. 
• Keep out of reach of children when filled with hot liquids.
• Prior to drinking, check to ensure the lid is properly threaded to body and screwed down 100%.  Button should be depressed to release pressure each time the lid is screwed on.
• If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before sealing with the lid.
• Coffee brewed below boiling temperatures can be poured directly from coffee makers into the mug without waiting for liquid to cool down.
• Avoid accidental depressing of button by sliding the button down to lock, exposing the red "locked" area above the button.
• Do not overfill.  Fill liquids to just below the threading in the body. 
• Do not microwave and do not freeze. 
• Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh chemicals.

USAGE RECOMMENDATIONS

• Suitable for hot and cold beverages.
• To screw the lid on easily and safely place lid on top of mug.  Apply slight downward pressure and rotate counter-clockwise until you hear a click and lid falls into place.  Proceed to rotate lid clockwise to tighten down.
• The AUTOSEAL® lid that came with your new purchase is designed to only fit your new Contigo® mug. Not for use with other products.
• AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
• Following your purchase, wash all parts with hot soapy water before use. Rinse thoroughly and dry. Always store with lid removed to allow parts to dry completely.
• Travel mug and lid are top-rack dishwasher safe. 

LID CLEANING TIPS Always rinse the lid immediately after each use.  Store with lid removed to allow parts to dry completely
Rinse drink spout immediately after use, prior to putting into the dishwasher:  

1.  Turn lid so the underside is facing up and fill lid with hot soapy water.
2.  Tilt the lid towards the drink spout while pressing the button to allow the soapy water to rinse through the drink spout.
3.  Repeat 1 and 2 a few times for best results.

Rinse lid vent immediately after use, prior to putting into the dishwasher:  

1.  Turn lid so the underside is facing up and fill lid with hot soapy water.
2.  Tilt lid towards the button while pressing the button to allow the soapy water to rinse through the vent hole.
3.  Repeat 1 and 2 a few times for best results.

To clean the top of the lid 1.  Use a non-abrasive sponge or brush head/swab to clean the drink spout in the open and closed position.
2.  Rinse while pressing the button to allow the soapy water to rinse through the drink spout.

Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy water.

If desired, a small, pipe-cleaner-style brush, small arts and crafts paint brush, or a cotton swab can be used to clean the inside of the AUTOSEAL® mechanism.  Turn lid so the underside is facing up and fill lid with hot soapy water.  Run brush head or swab along the following areas to ensure complete cleaning:

1.  Underneath and along both sides of the center plastic piece of the lid.  Reference "A" and "C" below.
2.  Along both the inner and outer walls of the threading.  Reference "B" below.
3.  The underside of the spout.  Reference "D" below.

Rinse repeatedly while pressing the button to allow the soapy water to rinse through the drink spout.

Click to view General Care & Use Instructions (all products)

WARNING:

• Careful.  The beverage you are about to enjoy is very hot.  For best results always use caution.
• Always press the AUTOSEAL® button when the tumbler is in the upright position prior to lifting it to drink.  This will release any built-up pressure.  Release button to seal mug. 
• Keep out of reach of children when filled with hot liquids.
• Prior to drinking, check to ensure the lid is properly threaded to body and screwed down 100%.  Button should be depressed to release pressure each time the lid is screwed on.
• If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before sealing with the lid.
• Coffee brewed below boiling temperatures can be poured directly from coffee makers into the mug without waiting for liquid to cool down.
• Avoid accidental depressing of button by keeping button free and clear of other objects.
• Do not overfill.  Fill liquids to just below the threading in the body. 
• Do not microwave and do not freeze.
• Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh chemicals. 

USAGE RECOMMENDATIONS:

• Suitable for hot and cold beverages.
• To screw the lid on easily and safely place lid on top of mug.  Apply slight downward pressure and rotate counter-clockwise until you hear a click and lid falls into place.  Proceed to rotate lid clockwise to tighten down.
• The AUTOSEAL® lid that came with your new purchase is designed to only fit your new Contigo® mug. Not for use with other products.
• AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
• Following your purchase, wash all parts with hot soapy water before use. Rinse thoroughly and dry. Always store with lid removed to allow parts to dry completely.
• Travel mug and lid are top-rack dishwasher safe.

LID CLEANING TIPS:

Always rinse the lid immediately after each use.  Store with lid removed to allow parts to dry completely.
Rinse drink spout immediately after use, prior to putting into the dishwasher:  

1.  Turn lid so the underside is facing up and fill lid with hot soapy water.
2.  Tilt the lid towards the drink spout while pressing the button to allow the soapy water to rinse through the drink spout.
3.  Repeat 1 and 2 a few times for best results.

 Rinse lid vent immediately after use, prior to putting into the dishwasher:  

1.  Turn lid so the underside is facing up and fill lid with hot soapy water.
2.  Tilt lid towards the button while pressing the button to allow the soapy water to rinse through the vent hole.
3.  Repeat 1 and 2 a few times for best results.
Additional Cleaning Tips:

To clean the top of the lid: 

1.  Use a non-abrasive sponge or brush head/swab to clean the drink spout in the open and closed position.
2.  Rinse while pressing the button to allow the soapy water to rinse through the drink spout.

Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy water.

If desired, a small, pipe-cleaner-style brush, small arts and crafts paint brush, or a cotton swab can be used to clean the inside of the AUTOSEAL® mechanism.  Turn lid so the underside is facing up and fill lid with hot soapy water.  Run brush head or swab along the following areas to ensure complete cleaning:

1.  Underneath and along both sides of the center plastic piece of the lid.  Reference "A" and "C" below.
2.  Along both the inner and outer walls of the threading.  Reference "B" below.
3.  The underside of the spout.  Reference "D" below.

Rinse repeatedly while pressing the button to allow the soapy water to rinse through the drink spout.


Click to view General Care & Use Instructions (all products)
 

WARNING:

• Careful. The beverage you are about to enjoy is very hot. For best results always use caution.
• Always press the AUTOSEAL® button when the tumbler is in the upright position prior to lifting it to drink.  This will release any built-up pressure.  Release button to seal mug. 
• Keep out of reach of children when filled with hot liquids.
• Prior to drinking, check to ensure the lid is properly threaded to body and screwed down 100%.  Button should be depressed to release pressure each time the lid is screwed on.
• If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before sealing with the lid.
• Coffee brewed below boiling temperatures can be poured directly from coffee makers into the mug without waiting for liquid to cool down.
• Avoid accidental depressing of button by keeping button free and clear of other objects.
• Do not overfill.  Fill liquids to just below the threading in the body.
• Do not microwave and do not freeze. 
• Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh chemicals.

USAGE RECOMMENDATIONS:

• Suitable for hot and cold beverages.
• To screw the lid on easily and safely place lid on top of mug.  Apply slight downward pressure and rotate counter-clockwise until you hear a click and lid falls into place.  Proceed to rotate lid clockwise to tighten down.
• The AUTOSEAL® lid that came with your new purchase is designed to only fit your new Contigo® mug.  Not for use with other products.
• AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
• Following your purchase, wash all parts with hot soapy water before use. Rinse thoroughly and dry. Always store with lid removed to allow parts to dry completely.
• Lid is top-rack dishwasher safe. 
• Hand wash travel mug body.

LID CLEANING TIPS:

Always rinse the lid immediately after each use.  Store with lid removed to allow parts to dry completely.
Rinse drink spout immediately after use, prior to putting into the dishwasher:  

1.  Turn lid so the underside is facing up and fill lid with hot soapy water.
2.  Tilt the lid towards the drink spout while pressing the button to allow the soapy water to rinse through the drink spout.
3.  Repeat 1 and 2 a few times for best results.

Rinse lid vent immediately after use, prior to putting into the dishwasher:  

1.  Turn lid so the underside is facing up and fill lid with hot soapy water.
2.  Tilt lid towards the button while pressing the button to allow the soapy water to rinse through the vent hole.
3.  Repeat 1 and 2 a few times for best results.


Additional Cleaning Tips:

To clean the top of the lid: 

1.  Use a non-abrasive sponge or brush head/swab to clean the drink spout in the open and closed position.
2.  Rinse while pressing the button to allow the soapy water to rinse through the drink spout.

Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy water.

If desired, a small, pipe-cleaner-style brush, small arts and crafts paint brush, or a cotton swab can be used to clean the inside of the AUTOSEAL® mechanism.  Turn lid so the underside is facing up and fill lid with hot soapy water.  Run brush head or swab along the following areas to ensure complete cleaning:

1.  Underneath and along both sides of the center plastic piece of the lid.  Reference "A" and "C" below.
2.  Along both the inner and outer walls of the threading.  Reference "B" below.
3.  The underside of the spout.  Reference "D" below.

Rinse repeatedly while pressing the button to allow the soapy water to rinse through the drink spout.


Click to view General Care & Use Instructions (all products)

• Careful. The beverage you are about to enjoy is very hot. For best results always use caution.
• Always press the AUTOSEAL® button when the tumbler is in the upright position prior to lifting it to drink.  This will release any built-up pressure. Release button to seal mug.
• Keep out of reach of children when filled with hot liquids.
• Prior to drinking, check to ensure the lid is properly threaded to body and screwed down 100%.  Button should be depressed to release pressure each time the lid is screwed on.
• If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before sealing with the lid.
• Coffee brewed below boiling temperatures can be poured directly from coffee makers into the mug without waiting for liquid to cool down.
• Avoid accidental depressing of button by keeping button free and clear of other objects.
• Do not overfill.  Fill liquids to just below the threading in the body. 
• Do not microwave and do not freeze.
• Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh chemicals.

USAGE RECOMMENDATIONS:

• Suitable for hot and cold beverages. 
• To screw the lid on easily and safely place lid on top of mug.  Apply slight downward pressure and rotate counter-clockwise until you hear a click and lid falls into place.  Proceed to rotate lid clockwise to tighten down.
• The AUTOSEAL® lid that came with your new purchase is designed to only fit your new Contigo® mug.  Not for use with other products.
• AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
• Following your purchase, wash all parts with hot soapy water before use. Rinse thoroughly and dry. Always store with lid removed to allow parts to dry completely.
• All lids are top-rack dishwasher safe.
• If you have purchased a mug that has a brushed stainless steel body (not colored/painted body), the body is top-rack dishwasher safe.
• If you have purchased a mug that has a COLORED/PAINTED body, it is recommended that the body be hand washed.

LID CLEANING TIPS:
Always rinse the lid immediately after each use.  Store with lid removed to allow parts to dry completely.

Rinse drink spout immediately after use, prior to putting into the dishwasher:  

1.  Turn lid so the underside is facing up and fill lid with hot soapy water.
2.  Tilt the lid towards the drink spout while pressing the button to allow the soapy water to rinse through the drink spout.
3.  Repeat 1 and 2 a few times for best results.

                 Rinse lid vent immediately after use, prior to putting into the dishwasher:  

1.  Turn lid so the underside is facing up and fill lid with hot soapy water.
2.  Tilt lid towards the button while pressing the button to allow the soapy water to rinse through the vent hole.
3.  Repeat 1 and 2 a few times for best results.

Additional Cleaning Tips:
To clean the top of the lid: 
1.  Use a non-abrasive sponge or brush head/swab to clean the drink spout in the open and closed position.
2.  Rinse while pressing the button to allow the soapy water to rinse through the drink spout.

Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy water.

If desired, a small, pipe-cleaner-style brush, small arts and crafts paint brush, or a cotton swab can be used to clean the inside of the 
AUTOSEAL® mechanism.  Turn lid so the underside is facing up and fill lid with hot soapy water.  Run brush head or swab along the 
following areas to ensure complete cleaning:

Underneath and along both sides of the center plastic piece of the lid.  Reference "A" and "C" below.
Along both the inner and outer walls of the threading.  Reference "B" below.
3.  The underside of the spout.  Reference "D" below.

;Rinse repeatedly while pressing the button to allow the soapy water to rinse through the drink spout.


Click to view General Care & Use Instructions (all products)
 

WARNING:

• Careful: The beverage you are about to enjoy is very hot. For best result always use caution.
• Always depress the AUTOSEAL® button, when the mug is in the upright position before tipping to drink. This will release any build up pressure. Release the button when done drinking to automatically seal.
• Keep out of reach of children when filled with liquids.
• Prior to drinking, check to ensure the lid is properly threaded to the body and screwed down 100%. Press the button on the handle prior to drinking to release any pressure each time the lid is screwed on.
• If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before sealing with the lid.
• Coffee brewed below boiling temperatures can be poured directly from coffee makers into the mug without waiting for liquid to cool down.
• Avoid accidental depressing of button by sliding the lock (located on the handle at the rim) toward the drink spout until it clicks, exposing the "locked" text on the button.
• Do not overfill. Fill liquids to just below the threading in the body.
• Do not microwave and do not freeze.
• Do not use cleaners containing bleach, chlorine, abrasive and/or other harsh chemicals.

USAGE RECOMMENDATIONS:

• Suitable for cold and hot beverages.
• To screw the lid on easily and safely place lid on top of mug. Apply slight downward pressure. Rotate counter clockwise until you hear a click whe the lid falls into place. Rotate lid clockwise to tighten.
• The AUTOSEAL® lid that came with your new purchase is designed to fit your mug design.Not for use with other products.
• The AUTOSEAL® lid is designed to help prevent spill.
• Following your purchase wash all parts with soapy water before use. Rinse thoroughly and dry. Always store with lid removed to allow parts to dry completely.
• All lids are top rack dishwasher safe.
• If you have purchased a mug that has a brushed stainless steel body (not colored or painted body) ,the body is top-rack dishwasher safe.
• If you have purchased a mug that has a colored or painted body, it is recommended that it is hand washed.

LID CLEANING TIPS:
Remove the lid from the mug and turn upside down. Rotate the locking
oval disk 45 degrees counter-clockwise to unlock. Fold out until it rests in the open position for easy access and cleaning.

Holding the lid handle in your hand, press up on the indentation on the handle curve to release the button from the top of the handle.


Rinse the drink spout with warm water immediately after use and prior to putting into the dishwasher.
Turn the lid upside down allowing water to run through the drink spout.
Repeat as necessary.
Place the lid on the top rack of your dishwasher with the undercarriage and button in the open cleaning positions.

Additional Cleaning Tips:
To handclean the top and underside of the lid:

• Use a non-abrasive sponge or brush/swab to clean the drink spout once the button is lifted up from the handle and the undercarriage is unlocked and folded open.
• Swish lid in hot, soapy water and rinse thoroughly holding the lid both rightside up and upside down.
• Leave lid parts open to dry.
• Prior to use, lock undercarriage back into place and close button into the handle.

Click to view General Care & Use Instructions (all products)
 

WARNING:

• Careful. The beverage you are about to enjoy is very hot. For best results always use caution.
• Always press the AUTOSEAL® button when the tumbler is in the upright position prior to lifting it to drink.  This will release any built-up pressure. Release button to seal mug.
• Keep out of reach of children when filled with hot liquids.
• Prior to drinking, check to ensure the lid is properly threaded to body and screwed down 100%.  Button should be depressed to release pressure each time the lid is screwed on.
• If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before sealing with the lid.
• Coffee brewed below boiling temperatures can be poured directly from coffee makers into the mug without waiting for liquid to cool down.
• Avoid accidental depressing of button by keeping button free and clear of other objects.
• Do not overfill.  Fill liquids to just below the threading in the body. 
• Do not microwave and do not freeze.
• Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh chemicals.

USAGE RECOMMENDATIONS:

• Suitable for hot and cold beverages. 
• To screw the lid on easily and safely place lid on top of mug.  Apply slight downward pressure and rotate counter-clockwise until you hear a click and lid falls into place.  Proceed to rotate lid clockwise to tighten down.
• The AUTOSEAL® lid that came with your new purchase is designed to only fit your new Contigo® mug.  Not for use with other products.
• AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
• Following your purchase, wash all parts with hot soapy water before use. Rinse thoroughly and dry. Always store with lid removed to allow parts to dry completely.
• Lid is top-rack dishwasher safe.
• Hand wash mug body.

LID CLEANING TIPS:
Always rinse the lid immediately after each use.  Store with lid removed to allow parts to dry completely.
Rinse drink spout immediately after use, prior to putting into the dishwasher:  

Turn lid so the underside is facing up and fill lid with hot soapy water.
Tilt the lid towards the drink spout while pressing the button to allow the soapy water to rinse through the drink spout.
3.  Repeat 1 and 2 a few times for best results.

to putting into the dishwasher:  

Turn lid so the underside is facing up and fill lid with hot soapy water.
Tilt lid towards the button while pressing the button to allow the soapy water to rinse through the vent hole.
3.  Repeat 1 and 2 a few times for best results.

Additional Cleaning Tips:

To clean the top of the lid: 

1.  Use a non-abrasive sponge or brush head/swab to clean the drink spout in the open and closed position.
2.  Rinse while pressing the button to allow the soapy water to rinse through the drink spout.

Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy water.

If desired, a small, pipe-cleaner-style brush, small arts and crafts paint brush, or a cotton swab can be used to clean the inside of the 
AUTOSEAL® mechanism.  Turn lid so the underside is facing up and fill lid with hot soapy water.  Run brush head or swab along the 
following areas to ensure complete cleaning:

& Underneath and along both sides of the center plastic piece of the lid.  Reference "A" and "C" below.
Reference "B" below.
3.  The underside of the spout.  Reference "D" below.

repeatedly while pressing the button to allow the soapy water to rinse through the drink spout.


Click to view General Care & Use Instructions (all products)

• Careful. The beverage you are about to enjoy is very hot. For best results always use caution. 
• The sealing lid is only designed to fit your Contigo® mug. Not for use with other products.
• Sealing lid is designed to help prevent spills from accidental tipping.
• Product can be used for both hot and cold liquids.
• Hand wash all parts with hot soapy water before use. Clean with lid in the open position. Rinse thoroughly and dry. Always store with lid removed.
• The lid closure tab should be in the open position when securing lid onto mug or when removing lid. Prior to drinking check to ensure the lid is secured tightly.
• Lid can be positioned for right- or left-handed drinkers.  
• Lid is top-rack dishwasher safe.  Body of the mug is hand wash only.
• Not recommended for carbonated beverages.

CAUTION:

• Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh chemicals.
• Do not microwave and do not freeze.
• Do not overfill.  Fill liquids to just below the lid threading.  Hot liquids can burn user. 
• Do not fill with boiling liquids.  Liquid temperatures should be 90 degrees C or less to avoid burning.
• Keep out of reach of children when filled with hot liquids. 

Click to view General Care & Use Instructions (all products)